Getting StartedCustomizing Your MonitorGetting StartedCustomizing Your Monitor
5Press the >?// buttons to select O1� or O2.�Before adjusting
Y Connect the monitor and the computer, and turn them on.Introducing the On-screenUsing the CENTER On-screen
Y Select OLANG� in the MENU OSD, then select
Display SystemDisplay
OENGLISH� (see page 14).
Most adjustments are made using the MENU OSD.The CENTER settings allow you to adjust the centering of
the picture.
Adjusting the Picture BrightnessMENU OSDOnce the setting is adjusted, it will be stored in memory for
When O1� is selected
the current input signal.
The signal from the computer connected to the HD15and ContrastPress the button to display the MENU OSD.
connector is input to the monitor.This MENU OSD contains links to the other OSDs described
Once the setting is adjusted, it will be stored in memory for1Press the button.
below.The MENU OSD appears.
When O2� is selectedall input signals received.
The signal from the computer connected to the 13W3
connector is input to the monitor.1Press the ? (brightness) ./> or > (contrast) ?//
buttons.
MENU
The BRIGHTNESS/CONTRAST OSD appears.The OPTION OSD automatically disappears after about 30MENUOK
seconds.BRIGHTNESS/CONTRASTCOLORCENTERSCREEN
2Press the ?./> and >?// buttons to select O
To close the OSD, press the button again.
GEOMEXITZOOMCENTER,� and press the button again.
2626The CENTER OSD appears.
For more information on using the OSD, see OIntroducing80.0kHz/ 75HzLANGSIZEOPTION
the On-screen Display System� on page 7.CENTER
When you connect computers to both connectorsHorizontalVertical73
Frequency*Frequency*
If you restart the computer you want to view, or thatEN
computer is in power saving mode, the monitor may26
2For brightness adjustment
automatically select the other connector�s signal. This is
Press the ?./> buttons.1 COLORF
because the monitor switches from the interrupted signal toDisplays the COLOR OSD for adjusting the color3For horizontal adjustment
the constant signal. If this happens, manually select thetemperature.Press the >?// buttons.ES
desired signal.
> . . . for more brightness2 CENTER
. . . . for less brightnessC
1-3Displays the CENTER OSD for adjusting the centering/ . . . to move the picture right
of the picture.? . . . to move the picture left
For contrast adjustment3 SCREEN
Press the >?// buttons.Displays the SCREEN OSD for adjusting the vertical
and horizontal convergence, etc.For vertical adjustment
Press the ?./> buttons.
/ . . . for more contrast4 ZOOM
? . . . for less contrastDisplays the ZOOM OSD for enlarging and reducing
the picture.> . . . to move the picture up
. . . . to move the picture down
5 OPTION
Displays the OPTION OSD for adjusting the OSD
The OSD automatically disappears after about 3 seconds.
position and degaussing the screen, etc.The OSD automatically disappears after about 30 seconds.
To reset, press the ? (reset) button while the OSD is on.To close the OSD, press the button again.6 SIZE
The brightness and contrast are both reset to the factoryDisplays the SIZE OSD for adjusting the picture size.
settings.To reset, press the ? (reset) button while the OSD is on.
7 LANGThe horizontal and vertical centerings are both reset to the
* The horizontal and vertical frequencies for the received inputDisplays the LANGUAGE OSD for selecting thefactory settings.
signal appear in the BRIGHTNESS/CONTRAST OSD.language.
8 GEOM
Displays the GEOMETRY OSD for adjusting the picture
rotation and pincushion, etc.
9 EXIT
Closes the MENU OSD.
67 |